Carl’s bucket (according to Carl)

Damn!

I described the contents of Carl’s bucket, and then I recorded Carl describing everything as he put it back in.

Carl and the contents of his bucket

I was going to put the recording here, but the machine ate it. No recording.

Idea posted here for future reference…

Carl’s bucket (according to me)

Carl’s bucket

  • 6x latex gloves: all used
  • 3x boxes: labeled 267-1222, tool steel, 8mm sq x 100mm, made in Sweden, PE
    • Box 1: contains 1 piece of toolsteel, 8mm sq x 100mm
    • Box 2: contains 4 tools, various shapes, total length approximately 8mm
    • Box 3: contains 1 piece of toolsteel, 8mm sq x 100mm
  • 1x 30cm ruler: steel, metric on one side, imperial on the other
  • 1x double-ended spatula
  • 1x Stanley tool: name and shape unknown
  • 3x biros: black, stubby
  • 1x biro tube: black and white striped, cut to approximately the same length as the biros
  • 1x cylindrical stub of Milliput(?): in knotted transparent plastic bag (bag split, Milliput dirty)
  • 2x small plastic cases: labeled Industrial Tooling Corporation SE. 0769, cutting tools may shatter: eye protection should be worn
    • Box 1: empty
    • Box 2: contains a small drilling tool
  • 2x length of brass tube: different lengths
  • 1x countersink: HSS, 12.4mm, 90°
  • 1x small drilling tool: shattered
  • 2x bolts: 40mm long, allen key top
  • 2x bolts: 50mm long, allen key top
  • 1x set of allen keys: 10mm, 8mm, 6mm, 5.5mm, 5mm, 4mm, 3mm, 2.5mm, 2mm, 1.5mm, complete
  • 1x plastic disc: white, slightly sticky about 60mm in diameter
  • 1x metal ring: approximately the same size as the plastic disc
  • 1x plastic bag: small, transparent, self-seal
  • 3x plastic discs: white, about 20mm in diameter
  • 2x pennies: one minted in 1976, one minted in 1989
  • 1x square of metal gauze
  • 1x rubber band: large
  • 1x small plastic self-seal bag:contains thin, sticky, transparent plastic discs
  • 2x thin, sticky, transparent plastic discs
  • 1x roll of sellotape: small, nearly finished
  • 1x metal component: about 25mm in diameter, with shoulder, hole through centre
  • 1x metal component: about 35mm in diameter, without shoulder, hole through centre
  • 1x 35mm bolt: black
  • 2x 18mm bolts: black
  • 1x small metal block: cutting blade attached
  • 1x resin moulding: bullet-shaped with internal screw thread

the contents of Carl's bucket